Oil well drilling mud desaner separator

Oil Well drilling mud desander separator is the 2nd solids control equipment in whole well drilling mud system. It is mainly used to separate particles larger than 44 microns. It is set after shale shaker or prior to vacuum degasser.

For desander, the hydrocyclones are 8~12″. Per clients’ requirement on flow rate and mud system circulation capacity. Desander cones number lead different treating capacity

Oil well drilling mud desander in solids control system

A solids control desander is the second phase cleaning for a whole solids control system. It sit on mud tank for separate drilling cuttings 44-75 micron and above by centrifugal force. The untreated mud will feed into desander cone at the horizontal inlet at pressure, the pressure and weight will help solids particles movig beside cone wall and drop down, fluids particles will be press on top and over flow away through pipeline.There can be a shaker to collect solids particles from desander nozzle or drop onto a hopper directly.

Desanding plant for bored pile

Desanding plant for bored pile require high mud flow with limit footprint and budget, it is mud recycling only with very limit mud storage capacity. AIPU supply various models of desander for mud flow 60 m³/h, 120 m³/h,240 m³/h with one set of double deck shale shaker, centrifugal pump, desander cyclones and a small mud tank. The double deck shale shaker work as first phase and second phase mud separation. The raw mud will be feed into bottom deck shaker with a coarse mesh screen for separate larger solids particles, top deck of screen install fine mesh screen for dry solids out of desander nozzle. There is auto control valve to allow mud over flow from desander drop into tank bellow shaker or over flow to next storage mud tank. There are some details introduction of desander plant in mud system page.

Feaures of oil well drilling mud desander

• 1. 100% Polyurethane(PU) Material for desander cones with longer using life.
• 2. Clamp type for easy maintenance.
• 3. Compact design with small footprint.
• 4. Flexible options for 1 or 2,or 3 for different capacities.
• 5. Different size of downstream shale shaker for option.
• 6. Flexible fast connection are available for user friendly assembly.
• 7. Tangentially blended into the cone entry as a narrow rectangle to minimizes turbulence in the upper section of the cone, allowing the solids to move quickly to the cone wall.

If any demand of oil well drilling mud desander or other solids control, just come to AIPU freely, you’ll get optimal solution