Shale shaker screens development depends on practical operation demand. Suppliers and manufacturers study the screen…
2020
Brandt®™ Shale Shaker Screens Conformed Replacement Manufacturer
Briefs of Aipu Shaker Screen
Our screen panels are available for most shale shakers. All screens are manufactured with high-quality stainless steel wire mesh, and all wire cloth checked for conformance to tolerances and visually inspected for weaving flaws. Advanced manufacturing processes and a stringent quality assurance program ensures that only the highest quality screens are shipped. All screens and a wide range of screen meshes are API RP 13C
Shaker screen life varies because of shaker conditions, mud condition, drilling condition, and the operator, etc. That means if the screens were from one batch and holding the same mesh size but life lasts different there might be the above reasons. For example, we drill an oil well in Kuwait use the OBM the extra thin screen cloth will help to get better penetration or conductance and leadless mud block or mud overflow but the life may be shorter since the fragile wire. When we use screens holding the same API size and the same configuration at some Yan’an oilfield sites use WBM, the screen life will be much longer. Since the general viscosity and mud condition is better than in Kuwait.
Some users find even everything is the same, the screen life performs differently. Please do check again, the shaker’s condition, such as the tensioning system, the bed seal, the spring condition, etc.. Besides, the shaker operator professionality is important. Some workers can handle screens professionally and easily, but some of them even don’t know to clean and put screens in the right places after every shut-off.
The mud engineers will test drilling fluids time by time. This will tell us how to do further process. They don’t check active mud property but also check the disposed of mud. They will evaluate whole mud volume and general mudflow situation. The capable mud engineers give the optimal suggestion on mud use and screen use. Finally, we’ll get the optimal solution on solids control for whole good drilling and save necessary cost
Aipu Solids Control makes replacement shale shaker screens for NOV Brandt shaker and mud cleaners.
Replacement Screen for Cobra or Venom Shaker
- Pretension frame shaker screen
- Compatible with NOV Brandt Cobra, King Cobra, Mini Cobra, Venom, LCM-2D, LCM-3D shale shaker, or mud cleaner or mud conditioner.
- Mesh available in SS304 / SS316 stainless steel.
- Fine diameter mesh or coarse diameter mesh for different drilling formations.
- Pretension frame for bigger usable screen area, longer life, lightweight, and corrosion resistance.
Replacement Screen for VSM300 Shaker
- Pretension frame Shaker Screen.
- Compatible with VSM 300 shale shaker and mud cleaner with different screens for Scalping, Primary, and Secondary deck.
- Mesh available in SS304 / SS316 stainless steel.
- Fine diameter mesh or coarse diameter mesh for different drilling formations.
- Pretension frame for bigger usable screen area, longer life, lightweight, and corrosion resistance.
Any demand of shaker screens or solids control equipment, contact Aipu freely, you will get a professional proposal very soon.