Water treatment and mud process system is  important cause people pay more and more attention on the environment-protection. The environmental pollution relects on many different aspect. Such as the water pollution, the trees loss, the windy and warmer weather So we often get inquiries on water treatment. Some of them are water treatment unit, some of them are the driver cleaning unit, and also some of them are the waste water recycling or the sewage process Actually, the water treatment is similar with drilling fluid solids control but not complete same. For example, we firstly need to operate the shale shaker filter the large solids out of water. Usually we suggest larger than 100 micorns should be separated out of the object. And according to actual condition select the desander and desilter. Let’s find some information about how to configure the water treatment system 1. Its configuration, process is similar with drilling mud process. But we need to know the solid percentage and detail property in the water to be processed. Such as the density, the viscosity, the size, etc. 2. Furthermore, we need to know do we need to recycle what? And dispose what? If we need to dry all of drain 3. If the water treatment plant is very near to oil and gas drilling we need all electical parts to be explosion-proof as well. The difference between the water treatment and the oil and gas drilling mud system is the capacity, subject source, the explosion-proof requirements. If you have questions or any interest pleaes contact Aipu now.